High Performance Pastes

GLEIT-μ® HP 502 is a homogeneous, grey-coloured high-performance paste based on a selected low-residue synthetic oil and a carefully coordinated, extremely temperature-stable solid lubricant combination. The base oil evaporates slowly at higher temperatures and is low in residues. As a result, the dry lubrication and separating effect via the solid lubricants that then occurs is not hindered. At the same time, the solid lubricants used were selected and matched to each other in such a way as to ensure temperature resistance up to +1500 °C.

GLEIT-μ® HP 505 is a uniform, blue-gray hot screw paste which is based on a selected biodegradable synthetic oil and a carefully balanced, extremely temperature-stable solid lubricant combination. The base oil evaporates slowly at higher temperatures and is low in residues. As a result, the subsequent occurring dry lubrication is not impeded via the solid lubricants. At the same time, the solid lubricants used are so selected and coordinated to each other that a temperature-resistance up to +1200 °C is ensured. Through the use of the innovative solid lubricants, it is also ensured that no reactions take place between the screw material and solid lubricant. GLEIT-μ® HP 505 does not contain any free heavy metals like lead, copper, aluminum, sulfur or molybdenum sulfide, which are known to react with the screw material at higher temperatures and weaken them.

This high-performance paste was specially developed for use as a hot screw paste. GLEIT-μ^® HP 505 is however also quite suitable as a screw paste for the normal temperature range and for lubrication of machine elements whose application temperature is very high and requires an effective separating layer for proper function.

• high temperature screws in
  • thermal power plants (turbine bolts/flanges, etc.)
  • petrochemical sector
  • automotive industry (emission systems)
  • heating systems
• Bolts, slideways and guideways that are operated in the high temperature range
• screw and bolt lubrication in standard temperature range

• constant, reproducible friction ratios
• Hot screw paste (-40 to +1200°C)
• enables the non-destructive loosening of hot screws
• prevents the baking and seizing-up of connecting elements, such as screws
• suitable metallurgy – does not react with screw materials, even at high temperatures
• Coefficient of friction µ_min (Screw test bench): (M12/8.8) ca. 0,09; (M12/A2) ca. 0,12

GLEIT-μ^® HP 506 is a homogeneous, grey hot screw paste based on a selected biodegradable synthetic oil and a carefully matched, extremely temperature-stable solid lubricant combination. The base oil evaporates slowly at higher temperatures and is low in residues. As a result, the subsequent occurring dry lubrication is not impeded via the solid lubricants. At the same time, the solid lubricants used are selected and matched such that temperature resistance up to +1000 °C is ensured.

This high-performance paste was specially developed for use as a screw paste and was designed with a coefficient of friction of µ_min = 0.12 in order to correspond to the conversion of torque into clamping force for the usual mathematical screw connections in the refinery sector. GLEIT-μ^® HP 506 is, however, also perfectly suited as a screw paste for the normal temperature range and to lubricate machine elements with a very high application temperature and which require an effective separation layer for correct function.

• high temperature screws in
  • thermal power plants
  • petrochemical sector
  • pipeline construction
  • heating systems
• Bolts, slideways and guideways that are operated in the high temperature range
• screw and bolt lubrication in standard temperature range

• high temperature screw paste
• constant, reproducible friction characteristics
• enables the non-destructive loosening of screws
• perfect conversion of torque into clamping force
• wide temperature range:-20 to +1000° C
• very good parting efficiency
• Coefficient of friction µ_min (Screw test bench M42/8.8): ca. 0,12

This high-performance paste is a homogeneous, gray-colored high-temperature flow paste based on a selected low-residue synthetic oil and a carefully coordinated, extremely temperature-stable solid lubricant combination. The base oil evaporates slowly and with low residue at high temperatures (+180°C). The solid lubricants used were selected and matched to one another so that the remaining dry lubricating film has excellent separating and lubricating properties.

GLEIT-μ^® HP 507 is used as a finish for casting tools in die casting, in addition to as a release agent in a high temperature range and as a lubricating paste for the highest operating temperatures. A further area of use is the lubrication of ejector pins in pressure casting machinery.

• finishing for spoons, ladles
• casting channels in a permanent mould foundry
• slow-running, hot plain bearings
• Ejector ins on die-casting machines
• als Trennmittel bei hohen Temperatuas a release agent at high temperaturesren

• excellent casting ladle coating
• very good parting efficiency
• especially suitable for ejector pins on die casting machines
• low-residue, high-quality synthetic oil
• broad operating temperature range: -15 to +1200 °C
• considered to be non-hazardous substance

GLEIT-μ® HP 509 is a homogeneous, easily spreadable, grey-black molybdenum disulphide paste, which is based on a selected synthetic oil and a solid lubricant combination with a high proportion of molybdenum disulphide. This high-performance paste is a proven all-round molybdenum disulfide paste for use at high temperatures. Thanks to its precisely matched combination of lubricants with a synergistic effect, the highest lubrication performance, excellent pressure resistance and dry lubricant characteristics are fulfilled perfectly. The basis for the high performance of GLEIT-μ® HP 509 is in the ability of the solid lubricants to cling to a surface under sliding loads in the boundary and mixed friction area. By that arises a very effective parting– and lubricating layer between the friction parts that also remains under extreme burdening.

The areas of application of GLEIT-μ^® HP 509 result directly from the special properties of this paste. GLEIT-μ^® HP 509 is particularly suited to clean, non-destructive assembly, for run-in optimisation for highly loaded machine elements and to lubricate screws and other machine elements, which are used in particular at high temperatures.

• Conveyor rollers in steel plants
• Spindle drives, even at higher temperatures
• Winding up– and press fit operations of bearings, bolts, wheels etc.
• Screw and bolt lubrication
• Ball joints, slideways

• MoS₂ Paste on a Synthetic Oil Base
• very high pressure resistance
• prevention of stick-slip (backlash)
• constant, low coefficients of friction – even under extreme conditions
• wide temperature range (General lubrication: -25 to +400 °C; Assembling application (thin layer): -35 to +450 °C; at reduced oxygen admittance: up to 630 °C)
• Optimizes running-in processes
• Gives dry running properties
• Good corrosion protection
• for slow movements and extremely high loads
• Coefficient of friction µ_min: ca. 0,09

GLEIT-μ^® HP 510 is a homogeneous, extremely smooth, white grease paste based on a specially selected mineral oil with a high proportion of coordinated, highly effective, light-colored solid lubricants. The selection and the proportion of solid lubricants is chosen so that this high-performance paste has good pressure absorption capacity in the boundary and mixed friction area – especially with oscillating, vibrating movements, minimizes the risk of fretting corrosion and optimizes the lubricating properties. Due to the small particle size of the solid lubricants used, GLEIT-μ^® HP 510 is a very fine, supple grease paste, which is, therefore, very suitable for use on fine, sensitive mechanics.

The areaof application of GLEIT-μ^® HP 510 is exclusively in the border and mixed friction area. GLEIT-μ^® HP 510 is always recommended if normal greases cannot meet requirements. This applies to the most diverse material pairings (steel/stainless steel, non-ferrous metals such as aluminium, brass).

• Stainless steel screws – no welding, low friction, low scatter
• Small gears (awning gears, antenna gears)
• spindle drives (control elements, hoists)
• joint bearings, guides
• Multi-groove profiles and hinges
• Spherical bearing (also in bronze)
• Gear couplings and splined shafts
• Plain bearings (also non-ferrous metal bearings)

• “the” white grease paste
• constant, low coefficients of friction
• high adhesion
• reduces fretting corrosion
• light colours and, therefore, very clean in application and use
• high pressure resistance
• long shelf life
• also suitable for non-ferrous metals
• Operating temperature range: -25 to +110 °C
• meets the KTW Recommendations (seals section D2)
• Friction coefficient µ_min: ca. 0,1

GLEIT-μ^® HP 512 is a homogeneous, light-colored paste with an extremely high percentage of white, synergetically-active solid lubricants. A specially matched mineral oil was selected as a carrier of the solid lubricant. The selection and the proportion of solid lubricants is chosen so that this high-performance paste can replace black assembly pastes in many cases. With jerky, oscillating movements, GLEIT-μ^® HP 512 is even significantly superior to black assembly pastes. The pressure absorption is exceptional, the danger of frictional corrosion is minimized and the lubricant properties are optimized.

GLEIT-μ^® HP 512 is well-suited for assembly purposes as well as for the running-in of slowly running machine elements (also for colored metals and stainless steel). Using GLEIT-μ^® HP 512 black pastes based on graphite and molybdenum sulfide basis can be replaced.

• assembly and running-in of machine elements (spherical bearings, bolts, pins, gears,…)
• screw and bolt lubrication
• Gear couplings and splined shafts
• mounting aid for storage

• light-colored and thus clean to use
• very high pressure resistance
• constant, low coefficients of friction
• broader application temperature range: -25 to +110 °C
• separating effect up to +200 °C
• good corrosion protection and high water-resistance
• also suitable for non-ferrous metals
• prevents the danger of frictional corrosion
• for the lubrication during jerky, oscillating movements

GLEIT-μ^® HP 513 is a homogeneous, light-colored paste with an extremely high proportion of white, synergistic solid lubricants. A specially tailored synthetic oil was chosen as the carrier for the solid lubricants. The selection and the proportion of solid lubricants is chosen so that this high-performance paste can replace black pastes in many cases. With jerky, oscillating movements, GLEIT-μ^® HP 513 black assembly pastes are even clearly superior. The pressure absorption is exceptional, the danger of frictional corrosion is minimized and the lubricant properties are optimized.

GLEIT-μ^® HP 513 is used for machine elements with high surface loads for assembly and case lubrication. GLEIT-μ^® HP 513 is ideally suited for shock loads, for all three load cases (I, II, III) and in particular for rapidly oscillating applications. When used, improved stick-slip behavior is achieved and fretting phenomena (red rust formation) are reduced. GLEIT-µ^® HP 513 offers a narrow coefficient of friction window even with moderate surface loads. Durch GLEIT-µ^® HP 513 black pastes based on graphite and molybdenum disulfide can be replaced in many areas with the “clean” paste.

• Household appliances
• Spherical bearings, bolts, pins, wheels, hinges, fittings
• Movement thread, ball bushings, ball screw gear
• for clean (white) applications
• Gear couplings and splined shafts

• Wide temperature range: -45 to +110 ° C (briefly up to 180 ° C)
• constant, low coefficients of friction even with medium surface loads
• far superior to MoS₂ products in the event of oscillations or vibrations
• good corrosion protection and high water-resistance
• light colours and, therefore, very clean in application and use
• very high pressure resistance
• prevents the danger of frictional corrosion
• also suitable for non-ferrous metals
• for the lubrication during jerky, oscillating movements

GLEIT-μ^® HP 515 is a homogeneous, light-coloured paste with an extremely high proportion of white, synergistic solid lubricants. A specially matched mineral oil was chosen as the carrier for the solid lubricants. A specially matched mineral oil was selected as a carrier of the solid lubricant. The cold shaping process is optimally supported by the very good pressure resistance and an excellent separation effect.

• metal pressing
• profile bending and shaping
• deep drawing
• Wire manufacturing
• additional lubricant for critical edges during deep drawing

• light-colored and thus clean to use
• Operating temperature range: -25 to +110 °C
• very high pressure resistance
• constant, low coefficients of friction
• for copper, aluminium and zinc
• also suitable for austenitic materials
• high separation effect
• not subject to labelling
• protects valuable tools from welding and wear

GLEIT-μ^® HP 516 is a homogeneous, light-coloured paste with an extremely high proportion of white, synergistic solid lubricants. A specially designed, flame-retardant mineral oil was chosen as the carrier for the solid lubricants. The hot shaping process is optimally supported by the very good pressure resistance and an excellent separation effect. At temperatures above +150°C the base oil evaporates with little residue. A dry film remains, which has an excellent separating and lubricating effect.

GLEIT-μ^® HP 516 was specially developed for use in hot forming under difficult forming conditions. This high-performance paste is also suitable for the lubrication of joints, bolts, guides and similar machine elements in the high-temperature range.

• Bolts and joints in the high temperature range
• Column guides
• Tools, moulds and work pieces for warm and hot forming

• light-colored and thus clean to use
• very high pressure resistance
• constant, low coefficients of friction
• temperature resistant up to +1150°C
• high lubricant effect in a high temperature area
• high separation effect

GLEIT-μ^® HP 520M is a homogeneous, light-colored paste with a very high percentage of white, synergetically-active solid lubricants. A specially matched mineral oil was selected as a carrier of the solid lubricant. The selection and percentage of solid lubricant is chosen so that GLEIT-μ^® HP 520M has excellent features especially with jerky, oscillating movements.The pressure absorption is exceptional, the danger of frictional corrosion is minimized and the lubricant properties are optimized. In order to optimally cover this task, this high-performance paste was deliberately developed only for use in boundary and mixed friction areas at slower speeds.

There are various application areas of GLEIT-μ^® HP 520M at boundary and mixed friction conditions. GLEIT-μ^® HP 520M is always recommended when normal greases are not able to meet the requirements due to challenging operating conditions and the use of highly effective pastes like GLEIT-μ^® HP 512 is not possible or is not ideal. This applies to the materials steel / stainless steel as well as to non-ferrous metals such as aluminum and brass.

• Stainless steel screws
• small gear boxes (awning or antenna gears)
• spindle drives (control elements, hoists)
• joint bearings, guides
• clamp elements
• Spherical bearing (also in bronze)
• Gear couplings and splined shafts
• Plain bearings (also non-ferrous metal bearings)

• constant, low coefficient of friction – also under extreme conditions
• Application temperature range: -20 to +120 °C
• high adhesion
• excellently prevents the danger of frictional corrosion
• light-colored and thus clean to use
• good corrosion protection and high water-resistance
• very high pressure-resistance
• long shelf life
• also suitable for non-ferrous metals
• Stainless steel screws – no welding, low friction, low scatter

GLEIT-μ^® HP 520TS is homogeneous, very water resistant paste with a very high percentage of white, synergetically-active solid lubricants. A specially matched combination of mineral oil and synthetic oil was selected as a carrier of the solid lubricant. The selection and percentage of solid lubricant is chosen so that GLEIT-μ^® HP 520TS has excellent features especially with jerky, oscillating movements. In order to optimally cover this task, this high-performance paste was deliberately developed only for use in boundary and mixed friction areas at slower speeds.

The pressure absorption is very high, the danger of frictional corrosion is minimized and the lubricant properties are optimized. GLEIT-μ^® HP 520TS has been especially developed for use at low velocity at boundary and mixed friction conditions. GLEIT-μ^® HP 520TS is always recommended when very good water resistance is required, when normal greases cannot meet the requirements and, due to the conditions of use, the use of highly effective pastes such as e.g.GLEIT-μ^® HP 512 is not possible or not optimal. This applies both to the materials steel / stainless steel and to non-ferrous metals such as bronze, aluminum and brass.

• clamp elements
• Stainless steel screws – no welding, low friction, low scatter
• small gear boxes (awning or antenna gears)
• spindle drives (control elements, hoists)
• slideways and guideways − also in outdoor use
• Spherical bearing (also in bronze)
• Gear couplings and splined shafts

• constant, low coefficient of friction – also under extreme conditions
• Application temperature range: -20 to +120 °C
• high adhesion
• excellently prevents the danger of frictional corrosion
• light-colored and thus clean to use
• good corrosion protection and excellent water-resistance
• high pressure-resistance
• long shelf life
• also suitable for non-ferrous metals
• Coefficient of friction µ_min: ca. 0,095

GLEIT-µ® HP 525 is a homogeneous, white lubricating paste based on mineral oil with a high proportion of reactive white solid lubricants. When energy is supplied through the action of the load and relative movement of the friction partners, these cause an extremely wear-resistant reaction layer to form, which enables a significant reduction in friction and wear and a run-in acceleration under mixed and boundary friction conditions – especially with vibration wear. The anti-corrosion effect is improved by special additives. The solid lubricants used are not subject to labeling. The paste can be used in the temperature range from -20 to 125 ° C.

• Assembly and running-in of machine elements
• Gear couplings
• Gear wheels
• Screw and bolt lubrication
• Driving gears
• Cams

• highly effective, white solid lubricants
• prevention of stick-slip (backlash)
• constant, low coefficients of friction even under extreme conditions
• Wide temperature range: -20 to +125 ° C
• Optimizes running-in processes
• very high pressure resistance
• extremely good emergency running properties
• for oscillating movements with extremely high loads
• GHS label-free

GLEIT-µ® HP 526 is a homogeneous lubricating paste based on lithium soap with synthetic oil and a high proportion of reactive white solid lubricants. When energy is supplied (load and relative movement), the new solid lubricants cause the formation of an extremely wear-resistant reaction layer, which enables a significant reduction in friction and wear under mixed and boundary friction conditions as well as with vibration wear. The solid lubricants used are not subject to labeling according to the CLP or GHS regulation!

• Slideways, sliding seats, joints, hinges
• Fastening elements such as screws, rivets, bolts
• Positive-locking couplings (e.g. splined shafts, grooves / splines, …)
• Adjustment mechanisms (spindles, cams, …)
• Storage of clamping and machine plates
• Ejector pins
• Racks, gears
• Disc, leaf, ring and buffer springs
• Generally as a substitute for black pastes (MoS2, graphite)

• Innovative, white solid lubricants
• Fast build-up of a stable, tribochemical wear protection layer
• Exceptionally effective against vibration wear
• Very high load carrying capacity
• Operating temperature range from – 40 ° C to + 130 ° C
• Universal use for:
  – Assembly
  – Running-in and permanent lubrication
• Environmentally friendly formulation, no labeling required!
• Possible increase in performance through additional surface treatment (phosphating, nitriding, …)
• Suitable for alloys containing copper (e.g. bronze such as LHG- 1013)

GLEIT-µ® HP 530 is a homogeneous lubricating paste with a calcium sulfonate complex thickener, mineral oil and a high proportion of reactive, white solid lubricants. When energy is supplied (load and relative movement), the new solid lubricants cause the formation of an extremely wear-resistant reaction layer, which enables a significant reduction in friction and wear under mixed and boundary friction conditions as well as with vibration wear. The solid lubricants used are not subject to labeling according to the CLP or GHS regulation!

• Slideways, sliding seats, joints, hinges
• Fastening elements such as screws, rivets, bolts
• Positive-locking couplings (e.g. splined shafts, grooves / splines, …)
• Adjustment mechanisms (spindles, cams, …)
• Storage of clamping and machine plates
• Ejector pins
• Racks, gears
• Disc, leaf, ring and buffer springs
• Generally as a substitute for black pastes (MoS2, graphite)

• Innovative, white solid lubricants
• Fast build-up of a stable, tribochemical wear protection layer
• Exceptionally effective against vibration wear
• Very high load carrying capacity
• Operating temperature range from – 40 ° C to + 130 ° C
• Universal use for:
  – Assembly
  – Running-in and permanent lubrication
• Environmentally friendly formulation, no labeling required!
• Possible increase in performance through additional surface treatment (phosphating, nitriding, …)
• Suitable for alloys containing copper (e.g. bronze such as LHG- 1013)

GLEIT-µ® HP 560 is a white, smooth grease paste based on mineral oil, lithium soap and a synergetic combination of reactive white solid lubricants. When energy is supplied, the solid lubricants cause the formation of an adhesive, wear-resistant reaction layer on the friction partners, which enables a significant reduction in friction and wear under mixed and boundary friction conditions, especially with oscillating sliding wear. Special additives improve the anti-corrosion effect and adhesion.

GLEIT-µ® HP 565 is a white, smooth grease paste based on mineral oil and a synergetic combination of reactive, white solid lubricants.

When energy is supplied, the solid lubricants cause the formation of an adhesive, wear-resistant reaction layer on the friction partners, which enables a significant reduction in friction and wear under mixed and boundary friction conditions, especially with oscillating sliding wear. Special additives improve the anti-corrosion effect and adhesion.

GLEIT-μ^® HP 571 a homogeneous silicone paste based on a specially selected silicone oil and a drip-point-free thickener system. The consistency was chosen so that it can be processed easily with a brush or sponge.

The raw materials used are FDA approved.

This high-performance paste shows an extremely favorable evaporation behavior, has an extremely good water resistance and is largely resistant to acids and alkalis. GLEIT-µ^® HP 571 has a wide temperature range and is extremely well tolerated by plastics and elastomers. The use of pure metal pairings, however, is rather limited.

GLEIT-μ^® HP 571 is always recommended, if a very good plastic and elastomer resistance is required, in cases of high temperatures or good resistance to acids, alkalis etc. is required. GLEIT-μ^® HP 571 has also proven itself very well for isolating switches, insulators, etc. (especially under the influence of moisture).

• O-rings, seals – ease of assembly, lifetime lubrication
• Lubrication of components with material pairing plastic / plastic, plastic / metal, rubber / rubber, rubber / metal etc.
• Plastic guides, plastic slide rails
• Release agent (for extreme requirements)
• Insulators, switchgear (prevents fl ash-overs and leakage currents)
• Lubricant for assembly purposes (cables, wires, …)
• Food and medical technology (physiologically harmless)

• very high oxidation resistance and chemical neutrality
• very good chemical resistance, waterrepellent and steam resistant
• no resinifi cation, wide temperature range
• thixotropic and very adhesive
• very good compatibility with plastics and elastomers
• also suitable for vacuum applications
• very good dielectric behaviour
• not subject to labelling, all ingredients meet the USDA or FDA guidelines

GLEIT-µ® HP 580 is a white, smooth grease paste based on mineral oil and a synergetic combination of reactive white solid lubricants.
When energy is supplied, the solid lubricants cause the formation of an adhesive, wear-resistant reaction layer on the friction partners, which enables a significant reduction in friction and wear under mixed and boundary friction conditions, especially with oscillating sliding wear. Special additives improve the anti-corrosion effect and adhesion.

GLEIT-µ® HP 580 is used to lubricate machine elements that are exposed to high pressures, shock loads, vibrations and oscillating movements. Static and kinetic vibration wear (tribocorrosion, fretting corrosion) is prevented or significantly reduced. Eating (welding) of the friction partners is avoided and the running-in phase is significantly shortened.